I recommend the Curt RV Bumper 2 inch Trailer Hitch Receiver # E-100 for your 2020 Forest River Wildwood FSX Travel Trailer.
The trailer hitch is intended to be used on a 4 inch square channel bumper. The hitch has a weight capacity rating of 3,500 pounds. This hitch is to be used with RV-approved accessories only.
If you have any further questions please feel free to reach back out to me anytime and I would be more than happy to further assist you in your towing endeavors. view full answer...
For your 2020 Forest River Wildwood FSX Travel Trailer that is prewired for a Furrion Camera, you can use either of the below options:
- Furrion Vision S Wireless RV Backup Camera System w/ Night Vision # FOS43TASF (4.3" Monitor)
- Furrion Vision S Wireless RV Backup Camera System w/ Night Vision # FOS05TASF (5" Monitor)
I have also included a video that goes over the installation of the camera. view full answer...
Yes, The Camco RV Water Heater Anode Rod # CAM11563 will work with your Suburban heater in your 2021 Georgetown GT7.
The aluminum anode rod attracts corrosive elements in your RV's water heater, protecting your tank from corrosion. The rod has a 3/4 inch diameter and is 9-1/2 inches long.
I attached a review video link below. view full answer...
We don't offer a 235/75-15 tire pre-mounted on a wheel with the bolt pattern you're looking for, but we do offer an off-road radial part # WST54FR that could be purchased separately from any of the 15x6 aluminum trailer wheels we offer with a 5 on 4-1/2 bolt pattern such as the Lionshead # LH35FR wheel.
The tire is a 235/75-15 radial in a load range D, which has a capacity of 2910 lbs per tire/5820 lbs per axle.
I've linked to videos for the wheels and tire mentioned above. view full answer...
I went ahead and called my contact at Lippert, and he said that more than likely, you need to change the magnetic door switch. If you have a newer model of Kwikee, you need an open circuit door switch. This is a black switch. For this part, I recommend the Replacement Magnetic Door Sensor for Kwikee Electric RV Steps # LC369299. view full answer...
When installing a leaf spring enhancement on your 2020 Vengeance 371 Toy Hauler The SumoSprings Trailer Helper Springs w/ Line Relocation Bracket - Single Axle - 5K to 8K - Overslung # SS26MV will work for you if you have a 5,000 pound to 8,000 pound single, overslung axle. You will need two kits.
The weight capacity of these springs are 900 pounds. The springs will help improve suspension, handling, and safety. The springs act as shock absorbers, taking the brunt of bumps and rough... view full answer...
Yes we do, for the Lippert Standard Baggage Door Latch Only # LC346693 you'll just need the Lippert Standard Baggage Door Mounting Plate # LC227099. view full answer...
We do not have information that tells us specifically what lights are on your 2012 Forest River Sunseeker, so the best way to determine what's going to fit is by providing measurements or a part number off the existing lights. With that said, it looks like you may have something similar to the Optronics LED Clearance or Side Marker Light w/ Reflex Reflector - 6 Diodes - Oval - Amber Lens # MCL31AB. The # MCL31AB is 4" long x 2-1/16" tall x 1" deep with mounting holes 3" apart (center on... view full answer...
I recommend something like the Stromberg Carlson Bike Bunk Trailer-Mounted Bike Rack Carrier for A-Frame Trailers # CC-275 which mounts to the tongue of your trailer and can support up to 100lbs.
This way this will avoid the spare tire on the rear of your trailer, and this rack will go over your propane tanks and attach to the frame of the trailer.
Alternatively, you can install a hitch to the rear of your trailer with # 13703 and a hitch extender like # BX88264 to push a bike rack out... view full answer...
Though we do not have an Ebike carrier that would work with your hollow bumper, we do have another option for you. I would recommend installing a frame mounted hitch like The Curt Multi Fit Hitch # 13703. This hitch will fit all frame styles that are between 22 and 72 inches apart and will give you up to 350 pounds tongue weight. This would work amazing with any RV approved e-bike rack like The Hollywood Racks RV Rider Bike Rack for 2 Electric Bikes # HLY64FR.
The Hollywood rack can carry... view full answer...
For your 2016 Forest River FR3 Motorhome, I recommend the Adjustable Width Trailer Hitch Receiver for RVs # C13702.
This trailer hitch is a class III hitch that will fit a frame that is 18" - 51" wide, has a maximum towing capacity of 5,000lbs, a maximum tongue weight 500-lbs, and will work great with your Honda CR-V.
However, I recommend checking with the manufacturer for the towing capacity of your RV, and compare the rating between the maximum towing capacity hitch, then utilize the... view full answer...
We do have several wiper blade options for your 2015 Forest River Georgetown motorhome like the:
-ClearPlus Frame Style Windshield Wipers - Front # CP77281 which fits various models of the 2015 Forest River Georgetown motorhome.
If you're able to let me know what specific model you have, I'd be happy to find a replacement for you. view full answer...
A 13 inch rim such as the # AM3S334 wheel you purchased would have a valve stem hole that's .453 inches in diameter, which is compatible with one of the grommets included with the the # AM20906 metal valve stem you'd looked at. These valve stems would be a better choice for use with a TPMS system. view full answer...
In order to convert your Wildwood X-Lite T197SS trailer, to a dual propane setup, you're going to need a regulator # CAM59005, a base for the second tank # CAM57236, and a supply hose # CAM59065.
If you prefer an enclosed case for your tanks, you can use the Adco RV Propane Tank Cover for Dual 20-lb Tanks # 290-2112. view full answer...
In order to switch to a 5 on 4-1/2 bolt pattern you are going to need a new hub and drum assembly. In order to select the correct one, you will need to figure out your axle capacity and what bearings fit your spindle.
Assuming your trailer has a 3,500 lb axle using the # L68149 inner and # L44649 outer bearing, you would be looking at the # 84546UC3 of if you have E-Z lube axles the # AKHD-545-35-EZ-K instead.
I recommend pulling off your current hub and drum assembly and looking at... view full answer...
The Replacement Slide Block for Extang Revolution Tonneau Covers # EX1077 is a replacement part for the Extang Revolution tonneau cover which is not available for your vehicle so we can not confirm if it'll work for you or not.
However, for towing mirrors we do have the K-Source Universal Towing Mirrors - Clip On - Flat Mirrors # KS69ZR which we can confirm will work great with your truck.
These mirrors clip onto your OEM mirrors and will give you the wider viewing angle you'll need for... view full answer...
You are correct, the Denver Mattress Rest Easy Plush RV Foam Mattress # DE29ZR measures 75" x 60", and will fit in your Murphy bed in your 2021 Forest River Cherokee Wolf Pup. view full answer...
In order to find the correct replacement Lippert jack for your Cedar Creek 5th Wheel I am going to need to know which jacks you have currently.
For instance, if you had the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System w Touchpad and Remote # LC675817 then you could use the Replacement Lead Leg for Lippert Components Ground Control 3.0 Electric Leveling System # LC305340 for a replacement.
Feel free to come back and let me know what you have and I'd be happy to find... view full answer...
When it comes to putting a bike rack on your pop up camper with a pro rack system I recommend The Rhino-Rack Hybrid Roof Bike Rack - Wheel Mount - Clamp On - Aluminum # RRRBC050.
This carrier works with Aero Bars, Factory Bars, Round/Square Bars, and Elliptical Bars. It can hold up to 45 pounds. It fits bikes with 20 inch to 29 inch tires, and it comes with an integrated cable lock that adds an additional layer of theft deterrence.
I attached a review video link below. view full answer...
If your 2011 Yukon XL already has the tow package you're well equipped to tow a Forest River E-Pro 19FD with a 600-lbs tongue weight. It sounds like you might be in need of a weight distribution system to help keep the rear end from sagging too much and creating poor handling conditions that could end up being dangerous. You'll want to choose your weight distribution hitch based off the trailer's tongue weight and you'll want the tongue weight to fall somewhere towards the middle of the... view full answer...
Go To Results